Bibliographie

ACEco Precision Wood Tooling. 2000. Industrial Wood Tooling, Catalogue technique. Idaho. EU. 61pp.

American Society for Testing and Materials. 1997 a. Standard test methods of static tests of lumber in structural sizes. ASTM D 198-99. ASTM, Philadelphia, PA. EU. pp. 57-75.

American Society for Testing and Materials. 1997 b. Standard test methods for evaluating adhesives for finger jointing lumber. ASTM D 4688. ASTM, Philadelphia, PA. EU. pp. 373-379.

American Society for Testing and Materials. 1995. Standard test methods for specific gravity of wood and wood-base materials. ASTM D 2395-93. ASTM, Philadelphia, PA. EU. pp. 348-355.

Ashland. 1999. InfotechTM. Fiche technique. Isoset polyurethane, emulsion polymer adhesives for structural wood application. Ashland specialty chemical company. Specialty polymers and adhesives division. Columbus, OH. EU. 3 pp.

Ashland. 2002. Fiche technique. ISOSET Polyurethane/emulsion polymer adhesives for structural wood applications. Columbus, OH. EU. 2 pp

Association des manufacturiers de bois de sciage du Québec, AMBSQ. 1999. Introduction au classement des bois aboutés par entures multiples. Manuel de cours. Fascicule 8. Québec, QC. Canada. 65 pp.

Ayarkwa, J., Y. Hirashima et Y. Sasaki. 2000a. Effect of finger geometry and end pressure on the flexural properties of finger-jointed tropical African hardwoods. Forest Prod. J. 50(11/12):53-63.

Ayarkwa, J., Y. Hirashima, Y. Sasaki et K. Ando. 2000b. Effect of glue type on flexural and tensile properties of finger-jointed tropical African hardwoods. Forest Prod. J. 50(10):59-68.

Ayarkwa, J., Y. Hirashima, K. Ando et Y. Sasaki. 2001a. Monitoring acoustic emissions from finger-joints from tropical african hardwoods for predicting ultimate tensile strength. Holzforchung 55(6): 652-600.

Ayarkwa, J., Y. Hirashima, K. Ando et Y. Sasaki. 2001b. Monitoring acoustic emissions to predict modulus of rupture of finger-joints from tropical african hardwoods. Wood Fiber Sci. 33(3): 450-464.

Barrett, J.D et W. Lau. 1994. Canadian lumber properties. Édité par E.D. Jones. Conseil canadien du bois. Ottawa, ON. Canada. 346 pp.

Belley, D. 2002. La consommation de sciages de sapin, épinettes, pin gris et mélèzes par l'industrie de la deuxième et troisième transformation du bois. Ministère des Ressources naturelles. Direction du développement de l'industrie des produits forestiers. Québec, QC. Canada. 53 pp. Consultée 25 mars 2003. http://www.mrn.gouv.qc.ca/publications/forets/entreprises/consomma_sciage_sepm.pdf (Consultée le 25 mars 2003.)

Bergeron, S., G.Hudon et J. Landry. 1979. Étude mécanique du joint d'aboutage à entures en flexion. Mémoire de fin d'études. Faculté de Foresterie et Géodésie. Université Laval. Québec, QC. Canada. 59 pp.

Biblis, E. et H. Carino. 1993. Factors influencing the flexural properties of finger-jointed southern pine LVL. Forest Prod. J. 43(1):41-46.

Bodig, J., B. et Jayne. 1982. Mechanics of wood and wood composites. Van Nostrand Reinhold, New York, NY. EU. 712 pp.

Bryant, A.H., R. D. Hunt, L. H. Shi et W.G. Ferguson. 1998. Finger joint geometry for optimum results. Proceedings 5th world conference on timber engineering. Édité par J. Natterer et J.-L. Sandoz. Polytechnic presses and romandes academics. 17-20 August 1998. Montreux, Suisse. Vol.2. pp. 198-206.

Bustos, C., R. Beauregard, M. Mohammad et R.E. Hernández. 2001. Effect of joint geometry on the performance of structural finger-jointed black spruce wood. Actes du colloque international RILEM sur des joints en structures du bois, PRO 22. Édité par S. Aicher et H.-W.Reinhardt. Sttutgart. All. pp. 503-512.

Bustos, C., R. Hernández, R.Beauregard et. M. Mohammad. 2002. Investigations on the wood machining parameters of finger-jointing process of black spruce. Proceedings of the 7th World conference on timber engineering. Timber construction in the new Millennium. Édité par Wan Mahmood Wan Ab. Majid et al. Timber joints. 12-15 August. Kuala Lumpur, Malaysie. Vol. 3 . pp. 130-136.

Bustos, C., R. Beauregard, M. Mohammad et R.E. Hernández. 2003a. Structural performance of finger-joined black spruce wood lumber with different joint configurations. Forest Prod. J. (sous presse).

Bustos, C., M. Mohammad, R. Hernández et R. Beauregard,. 2003b. Effects of curing time and end-pressure on the tensile strength of finger-joined black spruce lumber. Forest Prod. J. (sous presse).

Caster, D., N. Kutscha et G. Leick. 1985. Gluability of sanded lumber. Forest Prod. J. 35(4):45-52.

Centre Technique du Bois. 1973. Étude technico-economique de l'aboutage. Série III. Travail mécanique du bois – usinage - fabrication des matériaux dérives du bois. Cahier N° 92. Paris. France. 48 pp.

Centre Technique du bois et de l'ameublement. CTBA. 1991. Le collage du bois. Paris. France. 216 pp.

Chen, G. 2001. Two-part polyurethane adhesive for structural finger joints. Industrial applications of isocyanates and polyurethanes. The wood adhesives 2000 symposium. Section 2 A. : Industrial applications of isocyanates and polyurethanes. Édité par Forest Products Society. South Lake Tahoe. CA. EU. 22-23 June 2000. pp.15-16.

Chen, G. 2002. Communication personnelle. Corporate research and technology innovation. Department of Ashland specialty chemical company. Columbus, OH. EU.

Collins, M. et B. Walford 1998. Recent research into structural fingerjointing. New Zealand Engineering. Construction and construction materials. 53(6):24-26.

Conseil national de recherches Canada. 2001. Recueil d'évaluations de produits. Centre canadien de matériaux de construction. Division 6: Bois et plastiques. CCMC 12905-R. ISOSET®PEP Adhesive. Ottawa, ON. Canada. 217-220 pp.

Dawe, P.S. 1965. Strength of finger-joints. Paper presented at the International Symposium on joints in timber structures. 30 March-1 April. Édité par Timber Research and Development Association. London, Angleterre. 9 pp.

Deutsches Institut fuer Normung. 1971. Wood joints: Dovetail joints as longitudinal joints. DIN 68 140. Berlin. All. (D'après Jokerst 1981).

Ebewele, R., B. River et J. Koutsky. 1979. Tapered double cantilever beam fracture tests of phenolic-wood adhesive joints. Part I. Development of specimen geometry; effects of bondline thickness, wood anisotropy and cure time on fracture energy. Wood Fiber 11(3):197-213.

Fröblom, J. 1975. Factors affecting the quality of finger joints manufactured in commercial jointing machines. Paperi-Ja-Puu. 57(12):877-885.

Forest Products Laboratory. 1999. Wood Handbook.. Wood as an engineering material. General Technical. Report FPL-GTR-113. Department of Agriculture, Forest Service, Forest Products Laboratory. Madison, WI. EU. 463 pp.

Forintek Canada Corp. 2001. Carte routière technologique. Bois de sciage et produits à valeur ajoutée. Québec, QC. Canada. 133 pp.

Gardziella, A., L.A. Pilato et A. Knop. 2000. Phenolic Resins. Chemestry, applications, standarization, safety and ecology. 2nd Completely revised edition. Springer-Verlag Berlin Heidelberg New York. NY. EU. 560 pp.

Gerhards, C.C. 1982. Effect of moisture content and temperature on the mechanical properties of wood: An analysis of immediate effects. Wood Fiber. 14(1):4-36.

Green, D.W. et D.E. Kretschmann. 1994. Moisture content and the properties of clear Southern pine. Res. Pap. FPL-RP-531. USDA Forest Serv., Prod. Lab., Madison, WI. EU. 28 pp.

Green, D.W. et J.W. Evans. 2001. Evolution of standardized procedures for adjusting lumber properties for change in moisture content. Gen. Rapport technique. FPL-GTR-127. USDA Forest Serv., Forest Prod. Lab., Madison, WI. EU. 50 pp.

(http://www.fpl.fs.fed.us/documnts/FPLGTR/fplgtr127.pdf) (Consultée le 22 janvier 2002.)

Green, D.W., S.M. Cramer, B. Suryoatmono et D.E. Kretschmann. 2003. On fracture-related causes for reduction in tensile strength of Southern Pine lumber at low moisture content. Wood Fiber. Sci. 35(1):90-101.

Green, D.W., J.W. Evans. 2003b. Effect of low relative humidity on properties of structural lumber products. Wood Fiber Sci. 35(2):247-265.

Groom, L.H. et R.J. Leitchi. 1994. Effect of adhesive stiffness and thickness on stress distributions in structural finger joints. J. Adhesion 44:69-83.

Harris, J.M. 1989. Spiral grain and wave phenomena in wood formation. Springer-Verlag, New York, NY. EU. 214 pp.

Hernández, R.E. 1994. Effect of two wood surfacing methods on the gluing properties of sugar maple and white spruce. Forest Prod. J. 44(7/8):63-66.

Hernández, R. 1998. Analysis of strain in finger-jointed lumber. Proceedings 5th world conference on timber engineering. Édité par J. Natterer and J.-L. Sandoz. 17-20 August 1998. Montreux. Suisse. Vol.1. pp. 145-162.

Hernández, R.E. et N. Naderi. 2001. Effect of knife jointing on the gluing properties of wood. Wood Fiber Sci. 33(2):292-301.

Hernández, R.E. et G. Rojas. 2002. Effects of knife jointing and wear on the planed surface quality of sugar maple wood. Wood Fiber Sci. 34(2): 293-305.

Hernández, R.E. et L.F.de Moura. 2002. Effects of knife jointing and wear on the planed surface quality of Northern red oak wood. Wood Fiber Sci. 34(4):540-552.

Hoyle, Jr. R. J., M.D. Strickler et R.D. Adams. 1973. A finger-joint connected (FJC) wood truss system. Forest Prod. J. 23(8):17-26.

Janowiak, J. J., P. Labosky Jr, P.R. Blankenhorn et H.B. Manbeck. 1993. Finger-joint strength evaluations of three northeastern Hardwoods. Forest Prod. J. 43(9):23-28.

Jessome, A.P. 1958. The efficiency of scarf joints. Department of Northern affairs and National Ressources. Forestry branch. Forest Products Laboratories of Canada. Ottawa, ON. Canada. F.P.L.Note technique N°9. 18 pp.

Jessome, A.P. 2000. Résistance et propriétés connexes des bois indigènes au Canada. Forintek Canada Corp. Séries: Publication spéciale SP514F. Ste-Foy, QC. Canada. 37 pp.

Jokerst, R.W. 1980. The effect of geometry on the performance of structural finger-joints. Proceedings of Production, Marketing and use of finger-jointed sawnwood, United Nations Economic Commission for Europe. Du 15 au 19 Septembre 1980. C.F.L. Prins, Ed. Martinus Nijhof/ Dr. W. Junk Publishers. La Haye, Pays-Bas. pp.169-180.

Jokerst, R.W. 1981. Finger-jointed wood products. Forest Products Laboratory. Research paper FPL 382. Madison, WI. EU. 23 pp.

Jokerst, R.W. et H.A. Stewart. 1976. Knife-versus abrasive-planed wood: quality of adhesive bonds. Wood Fiber 8(2):107-113.

Juvonen, R. 1980. End pressure for finger-jointing. Proceedings of Production, Marketing and use of Finger-jointed Sawnwood. C.F.L. Prins, ed. Timber Committee of the United Nations Economic Commission for Europe. Martinus Nijhof/Dr. W. Junk Publishers. La Haye, Pays-Bas. pp.181-189.

King, T. et G. Chen. 2001. Adhesive and wood. Specialty Wood Journal 4(6):14-18.

Kinloch, A.J. 1987. Adhesion and Adhesives. Science and technology. Department of mechanical engineering Imperial College of Science and Technology, University of London, Angleterre. Édité par Chapman et Hall. 441 pp.

Kollmann, F.F.P. et W.A. Coté. 1968. Principles of wood science and Technology. Vol. 1., Springer-Verlag. New York, NY. EU. 592 pp.

Kretschmann, D.E. et D.W. Green. 1996. Moisture content-specific gravity relationships for clear Southern pine. Dans: Proceedings of the international wood engineering conference. Édité par Gopu, Vijaya K.A. 28-31 October. Nouvelle-Orléans, LA. EU. Vol.2. pp. 536-542.

Kretschmann, D.E. et D.W. Green. 1999. Lumber stress grades and design properties. Chapter 6. Dans: Wood Handbook.. Wood as an engineering material. General Technical. Report FPL-GTR-113. Department of Agriculture, Forest Service, Forest products Laboratory. Madison, WI. EU. pp. 6.1-6.14.

Kutscha, N.P et Caster, R.W. 1987. Factors affecting the bond quality of hem-fir finger-joints. Forest Forest Products Journal 37(4):43-48.

Lange, D., J.T. Fields et S.A. Stirn. 2001. Fingerjoint application potentials for one-part polyurethanes. Proceedings: The wood adhesives 2000 symposium. Section 2A: Industrial applications of isocyanates and polyurethanes. Édité par Forest Products Society. South Lake Tahoe, CA. EU. 22-23 June 2000. pp.17-18.

Lamy, C. 1995. Aperçu sur le bois d'ingénierie dans le contexte nord-américain et québécois. Ministère des Ressources naturelles du Québec, Direction du développement de l'industrie des produits forestiers. Québec, QC. Canada. 63 pp.

Leitchi, R.J. 1988. Structural finger joints under tensile loading modeled with finite elements and strength theory. Proceedings of the 1988 International Conference on Timber Engineering. Du 19 au 22 septembre à Seattle, Washington. Forest Products Research Society. Madison, WI. EU. Vol. 1. pp. 647-653.

Leitchi, R.J., R.H. Falk et T.L. Laufenberg. 1990. Prefabricated wood composite I-Beams: A literature review. Wood Fiber Sci. 22(1):62-79.

Madsen, B. et T.W. Littleford. 1962. Finger joints for structural usage. Forest Prod. J. 12(2):68-73.

Marra, A.A. 1992. Thecnology of wood bonding, principles in practice. Van Nostrand Reinhold, New York, NY. EU. 454 pp.

Marra, G. 1984. The role of adhesion and adhesives in the wood products industry. In: Adhesives for wood. Research applications, and needs. Edited by Robert H. Gillespie. USDA. Forest Serv., Prod. Lab. Madison, WI. EU. pp. 2-9.

Ménard, S. 1993. Les colles et le collage du bois. Centre de recherche industrielle du meuble et du bois ouvre (CRIMBO). Victoriaville, QC. Canada. 88 pp.

Ménard, S. 2000. Poutrelles triangulées en bois, à membrures parallèles et diagonales aboutées, comme système porteur principal de structures horizontales. Thèse de Doctorat N° 2010. École Polytechnique Fédérale de Lausanne. Lausanne. Suisse. 176 pp.

Moody, R.C. 1970. Tensile strength of finger-joints in pith-associated and non-pith-associated southern-pine 2 by 6's. USDA Forest Service. Forest Product Laboratory. FPL 138. Madison, WI. EU. 20 pp.

Morkved, K. 1982. Production, marketing and use of finger-jointed sawnwood: an overview. Proceedings of Production, Marketing and use of finger-jointed sawnwood, United Nations Economic Commission for Europe. Du 15 au 19 Septembre 1980. C.F.L. Prins, Ed. Martinus Nijhof/ Dr. W. Junk Publishers. La Haye, Pays-Bas. pp. 7-13.

MTS Systems Corporation. 1999. TestWorks R4, Version 4.03, Eden Prairie, MN. EU.

Murphey, W.K. et L.E. Rishel. 1972. Finger joint feasibility in furniture production. Forest Prod. J. 22(2):30-32.

Murmanis, L., B. River et H. Stewart. 1986. Surface and subsurface characteristics related to abrasive-planing conditions. Wood Fiber Sci. 18(1):107-117.

National Lumber Grades Authority. 2000a. Standard grading rules for Canadian lumber. National Lumber Grades Authority. NLGA. Vancouver, BC, Canada. 238 pp.

National Lumber Grades Authority. 2000b. Special products standard for fingerjoined structural lumber. NLGA-SPS 1. Vancouver, BC, Canada. 25 pp.

National Lumber Grades Authority. 2000c. Special products standard for fingerjoined vertical stud use only lumber. NLGA-SPS 3. Vancouver, BC, Canada. 24 pp.

National Lumber Grades Authority. 2001. Norme de produits spéciaux pour la semelle de bois jointé. NLGA-SPS 4. Vancouver, BC, Canada. 31 pp.

National Lumber Grades Authority. 2002. Standard specification for evaluation for adhesives for structural glued-wood products (exterior exposure). NLGA SPS Annex A. Vancouver, BC, Canada. 19 pp.

National Lumber Grades Authority. 2003. Special products standard for face glued lumber-vertical use only. NLGA-SPS 5. Vancouver, BC, Canada. 31 pp.

Ngangué, Y. 2000. Drying engineered wood products and their components: Impact of moisture content on performance of finger jointing. Project N° 2419, Canadian Forest Service. E-3392. Forintek Canada Corp. Ste-Foy, QC. Canada. 398 pp.

Pagel, H. F. et E.R. Luckman. 1984a. EPI-a new structural adhesive. Adhesives for wood. Research applications, and needs. Édité par Robert H. Gillespie. USDA Forest Serv., Forest Prod. Lab., Madison, WI. EU. pp. 139-149.

Pagel, H. F. et E.R. Luckman. 1984b. A new isocyanate containing wood adhesive. Dans: Wood Adhesives: Present and future. Journal of Applied Polymer Science. Applied polymer Symposium 40. Édité par A. Pizzi. John Wiley et Sons. pp. 191-202.

Parent, B. 2002. Ressources et industries forestières. Portrait statistique. Ministère des Ressources naturelles. Direction du développement de l'industrie des produits forestières. Gouvernement du Québec. Québec. Canada. Édition 2002. 397 pp.

Pavlov, V.P. 1954. Joining wood longitudinally with toothned tenons. Transl. From Denoaopenerababalyvaishrica I Les oknemicheskaia Promzehlennost (Wood Process and wood chem. Ind.) 3(10):5-8. (Cité par Jokerst 1981).

Pellicane, P. J. et R.C. Moody. 1988. Finite element modeling of finger-jointed lumber. Proceedings of the 1988 International Conference on Timber Engineering. Du 19 au 22 septembre à Seattle, Washington. Forest Products Research Society. Madison, WI. EU. Vol. 1. pp. 899-907.

Pellicane, P. J. 1994. Finite element Analysis of finger joints in lumber with dissimilar Laminate stiffnesses. Forest Prod. J. 44(3):17-22.

Pellicane, P.J., K. Stanfill-McMillan et R.J Tichy. 1987. Effects of knots near the finger of finger-jointed dimension lumber. Forest Prod. J. 37(5):13-16.

Pellicane, P.J., B.O. Hilson et I. Smith. 1986. A critical appraisal of the prospects for the United Kingdom glulam industry. Royaume-Unis. Journal of the Institute of Wood Science. 10(5):202-209.

Pellicane, P. J., R.M. Gutkowski et C. Jauslin. 1994. Effect of glueline voids on the tensile strength of finger-jointed wood. Forest Prod. J. 44(6):61-64.

Pellicane, P. J., R.M. Gutkowski et C. Jauslin. 1995. Comparison of optically and mechanically measured deformation in a finger-jointed wood tension specimen. ASTM, Journal of Testing and Evaluation. EU. 23 (2): 136-140.

Pizzi, A et K.L. Mittal. 1994. Handbook of adhesive technology. Marcel Dekker. New York. NY. EU. 680 pp.

Qu, Z. et C. Fan. 1988. Tensile strength of glued finger joints in timber structure and recommendation for their series. Proceedings of the 1988 International Conference on Timber Engineering. Du 19 au 22 septembre à Seattle, Washington. Forest Products Research Society. Madison, WI. EU. Vol. 1. pp. 654-662.

Raknes, E. 1982. The influence of production conditions of the strength of finger-joints. Proceedings of Production, Marketing and use of finger-jointed sawnwood, United Nations Economic Commission for Europe. Du 15 au 19 Septembre 1980. C.F.L. Prins, Ed. Martinus Nijhof/ Dr. W. Junk Publishers. La Haye, Pays-Bas. pp 155-168.

Reeb, J. E., J. J. Karchesy, J.R. Foster et R.L. Krahmer. 1998. Finger-joint quality after 4,6 and 32 hours of knife wear: Preliminary results. Forest Prod. J. 48(7/8):33-36..

Richards, D.B. 1958. End gluing lumber. Forest Prod. J. 8(3):99-104.

Richards, D.B. 1962. High-strength corner joints for wood. Forest Prod. J. 12(9):413-418.

Richards, D.B. 1963. Improved tips for finger joints. Forest Prod. J. 13(6):250-251.

Richards, D.B. et F.E. Goodrick. 1959. Tensile strength of scarf joints in Southern Pine. Forest Prod. J. 9(6):177-179.

River, B. et V. Miniutti 1975. Surface damage before gluing-weak joints. Wood and wood products. 80(7):35-38.

River, B.H, C.B. Vick et R.H. Gillespie. 1991. Wood as an adherend. Dans: Treatrise on Adhesion and adhesives. Édité par J. Dean Minford. Marcel Dekker. New York, NY. EU. pp. 1-230.

River, B. 1994. Fracture of adhesive-bonded wood joints Dans: Handbook of adhesive technology. Edited by Pizzi and Mitall. New York. NY. EU. pp. 151-177.

Samson, M. 1980. Effet de la qualité des membrures sur la flexion de composites en bois à âme mince. Une étude expérimentale. Thèse de doctorat, Faculté de Foresterie et de Géodésie, Université Laval, Québec, Canada. 115 pp.

Samson, M. 1985. Potential of finger-jointed lumber for machine stress-rated lumber grades. Forest Prod. J. 35(7/8):20-24.

Sandoz, J. 1984. Study of stress dispersion in finger-jointed wood. Work placement research conducted at the Federal Polytechnical School of Lausanne (EPFL). Wood construction chair, IBIOS. Lausanne, Suisse. 75 pp.

Sandoz, J., P. Rastogi et M. Walgenwitz. 1994. Grading and reliability of glued laminated timber. Proceedings of Pacific Timber engineering conference. Published by the Timber Research and Development Advisory council. July 11-15. Gold Coast, Australie. (1):663-670.

SAS Institute. 1998. SAS/Stat users guide, release 6.03 Ed. SAS Institute, Inc., Cary, NC. EU.

Selbo, M.L. 1963. Effect of joint geometry on tensile strength of finger joints. Forest Prod. J. 13(9):390-400.

Selbo, M.L. 1975a. End and corner joint construction. Dans: Adhesive bonding of wood. Technical bulletin N°1512. USDA. Forest Serv., Washington, DC. EU. pp. 49-55.

Selbo, M.L. 1975b. Surfacing wood for gluing. In: Adhesive bonding of wood. Bulletin technique N°1512. USDA. Forest Serv., Washington, DC. EU. pp. 60-61.

Sellers, T.Jr., J.R. McSween et W.T. Nearn. 1988. Gluing of eastern hardwoods: A review. General technical report SO-71. USDA. Forest Serv. Nouvelle-Orléans, Louisiane. 30 pp.

Serrano, E. 1997. Finger-joints for laminated beams. Experimental and numerical studies of mechanical behaviour. Lund University. Lund Institute of Technology. Division of structural mechanics. Report TVSM-3021. Lund. Suède. 95 pp.

Serrano, E. et P.J. Gustafsson. 1997. Influence of bondline brittleness and defects on the strength of finger-joints. Lund University. Lund Institute of Technology. Division of structural mechanics. Report TVSM-3024. Lund. Suède. 17 pp.

Shuler, C.E., D.A. Grant et R.C Moody. 1979. Evaluation of glued laminated beams of Eastern spruce and eastern Hemlock. Technical section. Forest Prod. J. 29(7):23-28.

Shuler, C.E. 1980. Response of Eastern spruce fingerjoints to variation in assembly time and moisture content. Wood Fiber. 12(4):227-232.

Singh, A.P., C.R. Anderson, J.M Warnes et J. Matsumura. 2002. The effect of planing on the microscopic structure of Pinus radiata wood cells in relation to penetration of PVA glue. Holz als Roh- und Werkstoff 60 (5): 333-341.

Smardzewski, J. 1996. Distribution of stresses in finger joints. Wood Sci. Technol. 30(6):477-489.

Stehr, M. et S. Östlund. 2000. An investigation of the crack tendency on wood surfaces after different machining operations. Holzforschung 54 (2000): 427-436.

Steiner, P.R. 1986. Bonding wood composites with isocyanates. Canadian Forestry Service, cat. No. Fo 42-91/5-1986E. Edmonton, Al. Canada. 19 pp.

Steele, P.H., R.E. Kreibich, P.J. Steynberg et R.W. Hemingway. 1998. Finger jointing green Southern yellow pine with a soy-based adhesive. Adhesives Age 40(10):49-55.

Stewart, H. A. et J.B Crist. SEM Examination of subsurface damage of wood after abrasive and knife planing. Wood Sci. 14(3):106-109.

Stieda, C.K.A. 1958. An investigation into the strength reducing effects of plain scarf joints in laminated wood beams. Mémoire de MSc. Université d'Alberta. Faculté d'ingénierie de la science. Département de génie civil. Edmonton, Al. Canada. 115 pp.

Strickler, M.D. 1967. Impression finger jointing of lumber. Forest Prod. J 17(10):23-28.

Strickler, M.D. 1970. End gluing of green lumber. Forest Prod. J. 20(9):47-51.

Strickler, M.D. 1980. Finger-jointed dimension lumber- past, present, and future. Forest Forest Prod. J. 30(9):51-56.

Sunley, J.G. 1980. The structural use of finger-jointing. Proceedings of Production, Marketing and use of finger-jointed sawnwood, United Nations Economic Commission for Europe. Du 15 au 19 Septembre 1980. C.F.L. Prins, Ed. Martinus Nijhof/ Dr. W. Junk Publishers. La Haye, Pays-Bas. pp. 55-59.

Suomi-Lindberg, L., P. Pulkkinen et R. Nussbaum. 2002. Wood Adhesion and Glued Products. State of the Art – Report. COST Action E13. Chapter 5: Influence of wood component on the bonding process and the properties of wood products. Working Group 1: Wood Adhesives. Édité par Manfred Dunky, Tony Pizzi et Marc Van Leemput. 1ère Édition-February 2002. Bruxelles, Belgique. pp. 118-140.

Tan, Y.E. 1993. Finger-jointed Meranti Tembaga (shorea leprusula) for structural use. Proceedings, Adhesive Technology and bonded tropical wood products, 25 to 28 May. Editor, Taiwan Forestry Research Institute. Taipei, Taiwan. pp. 464-472.

Troughton, G.E et S. Chow. 1977. Qualification tests of finger joints made by the WFPL technique. Departement of fiheries and teh environment canadian Forestry Service. Western forest products laboratory, Vancouver, BC. Canada. V6T 1X2. Rapport d'information VP-X-165. 12 pp.

Troughton, G.E. et A.E.Gee. 1979: Open-assembly-time effect on wfpl fingerjoint bond quality. Technical Report N° 8. Forintek Canada Corp. Western Forest Products Laboratory. Vancouver, BC. Canada. Novembre 1979. 6 pp.

Troughton, G.E et S. Chow. 1980. Finger-jointing kiln-dried and unseasoned white spruce lumber using the "WFPL Method". Note technique. Forest Prod. J. 30(12):48-49.

Turgeon, P.H. 1981. Aboutage et lamellage de bois. .Ministère de l'industrie, du Commerce et du Tourisme. Centre de recherche industrielle du Québec. Québec, QC. Canada. 103 pp.

Verreault, C. 1999. Performance evaluation of green gluing for finger jointing. Forintek Canada Corp. Rapport interne. CFS-VA rapport # 2295. Ste-Foy, QC. Canada. 59 pp.

Verreault, C. 2000. Assessment of two green gluing processes for finger jointing. Forintek Canada Corp. Rapport interne. CFS- VA rapport # 2407. Ste-Foy, QC. Canada. 137 pp.

Viereck, L.A et W.F. Johnston 2002. Picea mariana Black Spruce. http://www.forestworld.com/public/silvics/silvics_frame.html (Consultée le 12 juin 2002.)

Vrazel, M.E. 2002. The effects of species, adhesive type, and cure temperature on the strength and durability of a structural finger joint. Thèse de MSc. Department of Forest Products. Mississippi State University. Mississippi. EU. 71 pp.

Walford, B.G. 2000. Effect of finger length on fingerjoint strength in radiata pine. Proceedings, World Conference on Timber Engineering, July 31-August 3. Session 3.5.2. Whistler, B.C. Canada. 8 pp.

Wibbens, R.P. 1989. Glued laminated timber. Dans: Concise Encyclopedia of Wood and Wood Based Materials. Édité par A.P.Schniewind. Pergamon Press; Cambridge, Mass.: MIT Press. Oxford. Angleterre. pp. 125-129.

Wisconsin Knife Works, Inc. 2000. Premium Cutting Tools. Catalogue 07/00. Beloit, WI, USA.112 pp.