Collection Mémoires et thèses électroniques
Accueil À propos Nous joindre

Bibliographie

ABU-TAIR, A.I. et coll. (2000) A new method for evaluating the surface roughness of concrete cut for repair or strengthening , Construction and building materials, vol. 14, no 3, pp. 171-176.

ASTM C39 (1999) Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens , Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02, pp. 17-21.

ASTM C143 (1999) Standard Test Method for Slump of Hydraulic Cement Concrete , Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02, pp. 88-89.

ASTM C231 (1999) Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method , Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02.

ASTM C469 (1999) Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02, pp. 241-244.

ASTM C496 (1999) Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens , Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02, pp. 17-21.

ASTM C900 (1999) Standard Test Method for Pull-out Strength of Hardened Concrete , Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02, pp. 472-476.

ASTM C1583 (2004) Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-out Method) , Annual Book of ASTM Standards, Concrete and aggregates, volume 04.02.

AUBOUIN, A. et coll. (2001) Applications industrielles du moiré d’ombre et de projection à la limite des possibilités de ces techniques , Colloque Photomécanique, pp. 247-254.

AUSTIN, S. et coll. (1995) Tensile bond testing of concrete repairs , Materials and Structures, vol. 28, no 179, pp. 249-259.

BIEHL, F. (2000) GLAST Epoxy Thermal Shear Stress , Los Alamos, 11 pages.

BISSONNETTE, Benoit (1996) Le fluage en traction: un aspect important de la problématique des réparations minces en béton , Thèse de Doctorat, Université Laval, Québec.

BS 1881 : Part 207 (1992) Recommandations for the assessment of concrete near-to-surface tests , British Standards Institution, London.

BUNGEY, J. H. et M.N. Soutsos (2001) Reliability of partially-destructive tests of assess the strength of concrete on site, Construction and Building Materials, vol. 15, no 2-3, pp. 81-92.

CANADIAN PORTLAND CEMENT ASSOCIATION [CPCA] (1998) Concrete Design Handbook , Second Edition, Canada.

CEN TC104 (1992) Draft European Standard on Products and Systems for the Protection and Repair of Concrete Structures , CEN/TC104/WG8/TG2, Draft EN YYY, Part 39.

Centre de Recherches Routières (1969) Essai à la tache de sable. Détermination de la profondeur moyenne de nivellement des stries des revêtements en béton de ciment , C.R.R, Bruxelles, MF 32/69.

CLELAND, D.J. et coll. (1986) Bond strength of patch repair mortars for concrete , Chapman & Hall, pp. 235-245.

COURARD, L. (1999) Contribution à l’analyse des paramètres influençant la création de l’interface entre un béton et un système de réparation , Thèse de Doctorat, Université de Liège, Liège, 198 pages.

COURARD, L. et B. Bissonnette. (2004) Essai dérivé de l’essai d’adhérence pour la caractérisation de la cohésion superficielle des supports en béton dans les travaux de réparation : analyse des paramètres d’essai, Materials and Structures/Matériaux et Construction, vol. 37, no 269, pp. 342-350.

COURARD, L. et R. Degeimbre (2003) A capillary action test for the investigation of adhesion in repair technology , Canadian Journal of Civil Engineering, vol. 30, pp. 1101–1110.

COUVRAT, P. (1990) Le collage moderne , Éditions Hermes, Paris, 63 pages.

COUVRAT, P. (1992) Le collage structural moderne : théorie & pratique , Tec & Doc – Lavoisier, Paris, 246 pages.

CSA A23.2-6B (2001) Détermination de l’adhérence sous charge de traction , CSA International.

CUSSON, D. et N. Mailvaganam (1996) Durability of Repair materials , Concrete International, vol. 18, no 3, pp. 34-38.

DESROSIERS, H. (1999) Influence des cendres volantes sur le comportement au gel des matériaux cimentaires , Thèse de Maîtrise, Université Laval, Québec, 299 pages.

DRAPEAU, A. et M. Bélanger (1995) Manuel d’inspection des structures – Évaluation des dommages , Direction des Structures, Ministère des Transports, Québec, Québec.

EMBERSON, N.K. and G.C. Mays (1990) Significance of property mismatch in the patch repair of structure concrete Part1 : Properties of repair systems , Magazine of Concrete Research, 42, no 152, pp. 147-160.

EMMONS, P.H. et coll. (1994) Concrete repair in the future turn of the century – Any problems? , vol. 6, no. 3, pp. 42-49.

FELT, E.J. (1956) Resurfacing and Patching Concrete Pavement with Bonded Concrete , Proceeding of Highway Research Board, pp. 444-469.

GALECKI, G. et coll. (2001) Limitations to the use of waterjets in concrete substrate preparation, WJTA American Waterjet Conference, Minneapolis, Minnesota, page 35.

GODFREY, M.G. et coll. (1986) Revision Statistics, Edward Arnold, London, 144 pages.

HINDO, K.R. (1990) In-Place Bond Testing and Surface Preparation of Concrete , Concrete international, vol. 12, no 4, pp. 46-48.

KAMADA, T. et Victor C. Li (2000) The effects of surface preparation on the fracture behaviour of ECC/concrete repair system , Cement and Concrete Composites, vol. 22, no 6, pp. 423-431.

KLINK, Sami A. (1986) Aggregates, Elastic-Modulus and Poisson’s Ratio of Concrete , ACI Journal, vol. 83, no 6, pp. 961-965.

KÜNTZ, M. et coll. (2003) Confirmation of anomalous diffusion in non saturated porous building materials by a new capillary absorption test , American Society for Testing and Materials, 13 pages.

LANGLOIS, M et coll. (1994) Durability of Pavement Repairs : A Field Experiment , Concrete International, vol. 16, no 8, August 1994, pp. 39-43.

LI, G et coll. (2001) Transition zone studies of new-to-old concrete with different binders , Cement & Concrete Composites, vol. 23, pp. 381-387.

MACHABÉE, Yannick (2001) Choix des méthodes pour l’évaluation non destructive des ouvrages de béton , INFRA 2001, Holiday Inn Midtown, Montréal, Québec, 20 pages.

MAERZ, N.H. et coll. (2001) Laser profilometry for concrete substrate characterization prior to FRP laminate application , Concrete repair bulletin, pp. 4-8.

MONTGOMERY, Douglas C. et G.C. Runger (1999) Applied Statistics and Probability for Engineers, John Wiley & Sons, Inc., Second Edition, 817 pages.

MOREAU, M. et A. Mathieu (1979) Statistique appliquée à l’expérimentation , Ed. Eyrolles, Paris, 188 pages.

MORGAN, D.R. (1996) Compatibility of concrete repair materials and systems , Construction and Building Materials, vol. 10, no 1, pp, 57-67.

NEVILLE, A. M. (2000) Propriétés des bétons , Éditions Eyrolles, Paris, 806 pages.

PEREZ, F. (2005) Contribution à l’étude du comportement mécanique des éléments bicouches composés de bétons d’âge différents sous sollicitations monotones et cycliques , Thèse de Doctorat, Université Laval, Québec.

prEN 1542 (1994) Products and systems of the protection and repair of concrete structures – Test methods –Pull-off test , Comité Européen de Normalisation, Bruxelles.

prEN 1766 (1995) P roduits et systèmes pour la protection et la réparation des structures en béton – Méthodes d’essais – Bétons de référence pour essais , Comité Européen de Normalisation, Bruxelles.

SAUCIER, F. (1990) La durabilité de l’adhérence des réparations en béton, Thèse de Doctorat, Université Laval, Québec, 145 pages.

SAUCIER, F. et M. Pigeon. (1996) Testing of Superficial Repairs for Sidewalks in Canada, Concrete International, vol. 18, no 5, 84 pages (39-43).

SILFWERBRAND, J. (1990) Improving Concrete Bond in Repaired Bridge Decks , Concrete international, vol. 12, no 9, pp. 61-66.

SILFWERBRAND, J. et J. Paulsson (1998) Better Bonding of Bridge Deck Overlays , Concrete International, vol. 20, no. 10, pp. 56-61.

SILFWERBRAND, J. (2000) Evaluation of tests on water-jet equipment , Royal Institute of Technology, Sweden, pp. 113-119.

SPIEGEL, Murray R. (1974) Formules et tables de mathématiques, Série Schaum , McGraw-Hill, New York, 272 pages.

TALBOT, C. et coll. (1994) Influence of Surface Preparation on Long-term Bonding of Shotcrete , ACI materials journal, vol. 91, no 6, pp. 560-566.

TASONG, W.A., et coll. (1998) Aggregate-cement paste interface, II : influence of aggregate physical properties , Cement and concrete research, vol. 28, no 10, pp. 1453-1465.

VAN MIER, J.G.M. Fracture Processes of Concrete, U.S.A., CRC Press, 1997, 448 pages.

VAYSBURD, A.M. et J.E. McDonald (1999) An evaluation of Equipment and Procedures for Tensile Bond Testing of Concrete Repairs , US Army Corps of Engineering, 65 pages.

WELLS, J.A. et coll. (1999) Getting Better Bond in Concrete Overlays , Concrete international, vol. 21, no 3, pp. 49-52.

WU, K.-R. et coll. (2000) Reconstruction and analysis of 3-D profile of fracture surface of concrete, Cement and Concrete Research, vol. 30, no 6, pp. 981-987.

© Normand Bélair Jr, 2005