Collection Mémoires et thèses électroniques
Accueil À propos Nous joindre

Bibliographie

Alberta Research Council. 2003. PressMAN® Monitoring System, Forest Products Business Unit, Alberta Research Council, Edmonton, Alberta, Canada. http://www.arc.ab.ca/forpro/ForestProductsBU.asp

Avramidis, S. et Siau, J.F. 1987. An investigation of the external and internal resistance to moisture diffusion in wood. Wood Sci. Technol. 21: 249-256.

Avramidis, S. 1989. Evaluation of “three-variable” models for the prediction of equilibrium moisture content wood. Wood Sci. Technol. 23: 251-258.

Ball, R.D., Simpson, G. et Pang, S. 2001. Measurement, modelling and prediction of equilibrium moisture content in Pinus radiata heartwood and sapwood. Holz als Roh-und Werkstoff 59(6): 457-462.

Ben Ismail, A. et Morlier, P. 2003. Modélisation de la consolidation des panneaux à base de bois MDF. Rapport de Stage D.E.A. Laboratoire de rhéologie du bois de Bordeaux (LRBB). France. 144 pp.

Benrabah, Z. 2002. Modélisation tridimensionnelle par éléments finis des phénomènes hygro-thermiques dans les milieux poreux : Application au séchage du bois et à la dessiccation du béton. Thèse de Doctorat. Université Laval, Québec. 243 pp.

Boehme, C. 1994. Wasserdampf-Diffusionswiderstandszahlen von dünnen und dicken Spanplatten, senkrecht, schichtweise und parallel zur Plattenoberfläche ermittelt. WKI Short Report No. 10, Braunschweig, Germany.

Bolton, A.J., Humphrey, P.E. et Kavvouras, P.K. 1989. The hot pressing of dry-formed wood-based composites. Part III. Predicted vapour pressure and temperature variation with time, compared with experimental data for laboratory boards. Offprint.

Bowen, M. 1970. Heat transfer in particleboard during hot-pressing. Thèse de Doctorat. Colorado State University, Corvallis, United States. 114 pp.

Brunauer, S., Emmett, P.H. et Teller, E. 1938. Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60: 309-319.

Cai, L. et Wang, F. 1994. Steady and unsteady state moisture movement in particleboards. Holz als Roh und Werkstoff 52: 304-306.

Cai, X. 2002. Preparation of ionic interphase cellulose fiber/polymer composites. Mémoire de Maîtrise, Université Laval, Québec. 132 pp.

Carvalho, L.M.H., Costa, M.R.N. et Costa, C.A.V. 1997. Comparison between two and three dimensional models for heat and mass transfer in the hot-pressing process for MDF production. ECCE1. Florence, May 4-7. Italy. pp 2129-2132.

Carvalho, L.M.H., Costa, M.R.N. et Costa, C.A.V. 1998. Modeling and simulation of the hot – pressing process in the production of Medium Density Fiber Board (MDF). Chemical Engineering Communications. Vol. 170, pp. 1 – 21.

Carvalho, L.M.H., Costa, M.R.N. et Costa, C.A.V. 2001. Modeling rheology in the hot-pressing of MDF : Comparison of mechanicals models. Wood Fiber Sci. 33(3): 395-411.

Carvalho, L.M.H., Costa, M.R.N. et Costa C.A.V. 2003. A global model for the hot-pressing of MDF. Wood Sci. Technol. 37: 241-258.

Cammerer, J.S. 1956. Bezeichnungen und Berechnungsverfahren für Doffusionsvorgänge im Bauwesen. Kältetechnik 8: 339-343. (Cité par Niemz 1993 et Thoemen 2000)

Cammerer, W.F. 1970. Thermal conductivity and resistance to diffusion of wood-based materials. Holz Roh und Werkstoff 28(11): 420-423.

Cloutier, A. 2001. Notes de cours de panneaux agglomérés SBO-17195.

Cloutier, A. et Fortin, Y. 1991. Moisture content - water potential relationship of wood from saturated to dry conditions. Wood Sci. Technol. 25(4): 263-280.

Couturier, M.F., George, K. et Schneider, M.H. 1996. Thermophysical properties of wood polymer composites. Wood Sci. Technol. 30: 179-196.

Crank, J. 1975. The mathematics of diffusion. 2nd Edition Clarendon press, Oxford. 414 pp.

Dai, C. et Steiner, P.R. 1993. Spatial Structure of wood composites in relation to processing and performance characteristics. Part I: Rationale for model development. Wood Sci. Technol. 28: 45-51.

Dai, C. et Steiner, P.R. 1994. Spatial structure of wood composites in relation to processing and performance characteristics. Part II. Modeling and simulation of a randomly-formed flake layer network. Wood Sci. Technol. 28: 135-146.

Dai, C., Hubert, P. et Chen, S. 1997. Advances in modeling mat formation and consolidation for wood composites panels. Proceeding of the First European Panel Product Symposium. U.K.

Dai, C. 2001. Viscoelasticity of wood composite mats during consolidation. Wood Fiber Sci. 33(3): 353-363.

Dai, C. et Changming, Y. 2004. Heat and mass transfer in wood composite panels during hot-pressing. Part I. A physical mathematical model. Wood Fiber Sci. 36(34): 585-597.

Day, D.L. et Nelson, G.L. 1965. Desorption isotherms for wheat. Trans. of the ASAE. 8: 293-297.

Defo, M. 1999. Modélisation du séchage du bois sous vide par contact : l’approche du potentiel hydrique. Thèse de Doctorat. Université Laval, Québec. 246 pp.

Denisov, O.B. et Sosnin, M.S. 1967. Characterization of changing temperature and steam pressure inside a particleboard mat during pressing. Derev. Prom. 16(8):11 (Russe) Derev. Prom. 16(8):11 (Russe).

Engelhardt, F. 1979. Investigations on the sorption of water vapor by Beech at temperatures ranging from 110 to 170 ºC. Holz als Roh-und Werkstoff 37(3): 99-112.

Englund, K.R. et Wolcott, M.P. 2002. The Compression of Wood/Thermoplastic Fiber Mats During Consolidation. Journal Composites Part A: Applied Science and Manufacturing. Offprint.

FAO, 2005. Food and Agriculture Organization of the United Nations. FAOSTAT Forestry Data. Wood-based Panels. http://faostat.fao.org/

Fahrni, F. 1954.Chipboard pressing with the outer chip-layers more or less moist. Holz als Roh- und Werkstoff. 14(1): 8-10.

FPL. 1999. Wood Handbook. Chapter 3: Physical properties and moisture relations of wood. Forest Products Laboratory, Madison, United States. 463 pp.

Ganev, S., Gendron, G., Cloutier, A. et Beauregard, R. 2005. Mechanical properties of MDF as a function of density and moisture content. Wood Fiber Sci. 37(2): 327-354.

Ganev, S., Cloutier A., Beauregard, R. et Gendron, G. 2003. Effect of moisture content and density on moisture movement in MDF panels. Wood Fiber Sci. 35(1): 68-82.

Garcia, R.A. 2001. Contribution à l’étude du procédé de pressage à chaud des panneaux MDF. Mémoire de Maîtrise, Université Laval, Québec, Canada, 92 pp.

Garcia, R. et Cloutier, A. 2005. Characterisation of heat and mass transfer in the mat during the hot pressing of MDF panels. Wood Fiber Sci. 37(1): 23-41.

García, P. 2002. Three-dimensional heat and mass transfer during oriented stranboard hot-pressing. Thèse de Doctorat. University of British Columbia. 254 pp.

Geimer, R.L., Johnson, S.E. et Kamke, F.A. 1991. Response of flakeboard properties to changes in steam injection pressing environments. Res. Pap. FPL-RP-507. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory.

Gibson, L.J. et Ashby, M.F. 1988. Cellular solids: structure and properties. Oxford, England: Pergamon. 357 pp.

Godbille, F.D. 2002. A simulation model for the hot pressing of particleboard. Thèse de Doctorat. University of New Brunswick. 177 pp.

Hailwood, A.J. et Horrobin, S. 1946. Absorption of water by polymers: analysis in terms of a simple model. Trans. Faraday Society. 42B. 84-92, 94-102.

Harless, T.E.G., Wagner, F.G., Short, P.H., Dan Seale ,R.D., Mitchell, P.H. et Ladd D.S. 1987. A model to predict the density profile of particleboard. Wood Fiber Sci. 19(1): 81-92.

Haselein, C.R. 1998. Numerical Simulation of Pressing Wood-Fiber Composites. Thèse de Doctorat. Oregon State University. 244 pp.

Hata,T., Kawai, S. et Sasaki, H. 1990. Production of particleboard with steam-injection. Part 2: Computer simulation of temperature behaviour in particle mat during hot-pressing and steam-injection pressing. Wood Sci. Technol. 24: 65-78.

Hearle, J.W.S. et Peters, R.H. 1960. Moisture in textiles. Butterworth’s Scientific Publication. 203 pp.

Hood, J.P. 2004. Changes in Oriented Strandboard permeability during hot-pressing. Mémoire de Maîtrise, Virginia Polytechnic Institute and State University, USA. 85 pp.

Horn, J. 1969. Untersuchungen über die Wasserdampfdiffusion durch Holzspanplatten in Abhängigkeit von einigen technologischen und klimatischen Einfluβfaktoren. Hamburg University, Allemagne. 147 pp.

Hubert, P. et Dai, C. 1999. An object-oriented finite element processing model for oriented strand board composites. In: Proceedings, 12th international conference on composite materials; July; Paris, France. CD- Rom.

Humphrey, P.E. et Bolton, A.J. 1989. The hot pressing of dry-formed wood –based composites. Part II. A simulation model for heat and moisture transfer, and typical results. Holzforschung 43(3): 199-206.

Jannot, Y. 2003. Isothermes de sorption. Modèles et détermination. www.thermique55.com/principal/sorption.pdf

Kamke, F.A. et Casey, L.J. 1988. Fundamental of flakeboard manufacture: Internal mat conditions. Forest Prod. J. 38(6): 38-44.

Kamke, F.A. 2003. Physical of hot-pressing. Fundamentals of Composite Processing. Madison, Wisconsin. 5-6 November. 126 p.

Kamke, F.A. et Wolcott, M.P. 1991. Fundamentals of flakeboard manufacture: wood-moisture relationship. Wood Sci. Technol. 25: 57-71.

Kauman, W.G. 1956. Equilibrium moisture content relations and drying control in superheated steam drying. Forest Prod. J. 25(6): 328-332

Kavvouras, P.K. 1977. Fundamental process variables in particleboard manufacture. Thèse de Doctorat, University of Wales, Bangor, UK. 156 pp.

Kayihan, F. et Johnson, J.A. 1983. Heat and moisture movement in wood composite material during the pressing operation – a simplified model. Numerical Methods in Heat Transfer 2: 511-531.

Kelly, M. 1977. Critical review of relationships between processing parameters and physical properties of particleboard. Gen. Tech. FPL-10. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory.

King, G. 1960. Theories of multi-layer adsorption. In J.W.S. Hearle and R. H. Peters, eds., Moisture in textiles. Textile Book Publ. Inst., Inc., New York. 203 pp.

Kollmann, F. 1961. High temperature drying. For. Prod. J. 11(11): 508-515.

Koponen, H. 1984. Dependences of moisture diffusion coefficients of wood and wooden panels on moisture content and wood properties. Paperi ja Puu – Papper och Tra 12: 740 – 745.

Krischer, O. 1963. Die wissenschaftlichen Grundlagen der Trocknungstechnik. 2nd Edition Springer Verlag. 491 pp.

Kubojima, Y., Suzuki, Y., Tonosaki, M. et Ishikawa, A. 2003. Moisture content of green wood in high temperature water vapor. Holzforshung 57(6): 634-638.

Lang, E.M. et Wolcott, M.P. 1996. A model for viscoelastic consolidation of wood-strand mats. Part I: Structural characterization of the mat via Monte Carlo simulation. Wood Fiber Sci. 28 (1): 100-109.

Lang, E.M. et Wolcott, M.P. 1996. A model for viscoelastic consolidation of wood-strand mats. Part II: Static Stress-Strain behavior of the mat. Wood Fiber Sci. 28(3): 369-379.

Lehmann, W.F. 1972. Moisture stability relationships in wood base composites board. Forest Prod. J. 22(7): 53-59.

Lenth, C.A. et Kamke, F.A. 1996. Investigations of flakeboard mat consolidation. Part I: Characterizing the cellular structure. Wood Fiber Sci. 28(2): 153-167.

Lenth, C.A. et Kamke, F.A. 1996. Investigations of flakeboard mat consolidation. Part II: Modeling mat consolidation using theories of cellular materials. Wood Fiber Sci. 28(3): 309-319.

Lenth, C.A. et Kamke, F.A. 2001. Equilibrium moisture content of wood in high temperature pressurized environments. Wood Fiber Sci. 33(1): 104-118.

Luikov, A.V. 1975. Systems of differential equations of heat and mass transfer in capillary porous bodies. Int. Journal of Heat and Mass Transfer 18: 1-14.

Maku, T., Hamada, R. et Sasaki, H. 1959. Studies on the particleboard. Report 4: Temperature and moisture distribution in particleboard during hot-pressing. Wood Research Kyoto University. 21: 34-46.

Malmquist, L. 1959. Sorption of water vapor by wood from the standpoint of a new sorption theory. Holz als Roh-und Werkstoff 17(5): 171-178.

Mansilla, J. 1999. Modelación del sistema de prensado en la fabricación de tableros de madera aglomerada. Proyecto de Título Ingeniero Civil Químico, Universidad de Concepción, Chile. 112 pp.

Michaud, F. 2003. Rhéologie de panneaux composites bois/thermoplastiques sous chargement thermomécanique : aptitude au post-formage. Thèse de Doctorat. Université Laval, Québec. 256 pp.

Niemz, P. 1993. Physik des Holzes und der Holzwerkstoffe. DRW Verlag, Leinfelden Echterdingen. 243 pp.

Nigro, N. et Storti, M. 2001. Hot – pressing process modeling for medium density fiberboard (MDF). IJMMS. 26: 713-729.

Pereira, C.M.C., Blanchard, C., Carvalho, L.M.H. et Costa, C.A.V. 2001. Modelling and simulation of HF pre-heating of MDF. Proceedings 5th Panel Products Symposium. Wales, UK: 27-37.

Perré, P. 1996. The numerical modelling of physical and mechanical phenomena involved in wood drying: an excellent tool for assisting with the study of new processes. In Cloutier A. et al. (eds). 5th International IUFRO Wood Drying Conference Proceedings. 13-17 August. Québec, Canada. 559 pp.

Reddy, J.N. 1993. An introduction to the Finite Element Method. Second Edition. Mc Graw-Hill. 684 pp.

Ren, S. 1991. Thermo – Hygro Rheological behavior of materials used in the manufacture of wood – based composites. Thèse de Doctorat. Oregon State University. 226 pp.

Rosen H. 1980. Psychrometric relationships and equilibrium moisture content of wood at temperatures above 212 F. Wood Fiber Sci. 12(3): 153-171.

Rosenkilde, A. et Söderström, O. 1997. Surface phenomena during drying of MDF. Holzforschung 51: 79-82.

Shao, M. 1989. Thermal properties of wood fiber networks. Corvallis, OR: Oregon State University, Mémoire de Maîtrise. 95 pp.

Skaar, C. 1988. Water in wood. Syracuse Univ. Press. 283 pp.

Siau, J. 1984. Transport processes in wood. Springer-Verlag. 245 pp.

Siau, J. 1995. Wood: Influence of moisture on physical properties. Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University. 227 pp.

Simpson, W. 1973. Predicting equilibrium moisture content of wood by mathematical models. Wood Fiber Sci. 5(1): 41-49.

Simpson, W. 1980. Sorption theories applied to wood. Wood Fiber Sci. 12(3): 183-195.

Simpson, W. et Rosen, H. 1981. Equilibrium moisture content of wood at high temperatures. Wood Fiber Sci. 13(3): 150-158.

Stamm, A.J. 1964. Wood and cellulose science. Ronald Press. 549 pp.

Stanish, M.A., Schajer, G.S. et Kayihan, F. 1986. A mathematical model of drying for hygroscopic porous media. AIChE Journal 32(8): 1301-1311.

Strickler, M.D. 1959. The effect of press cycles and moisture content on properties of Douglas fir flakeboard. Forest Prod. J. 9(7): 203-207.

Strickler, M. 1968. High temperature moisture relations for grand fir. Forest Prod. J. 18(4): 69-75.

Suo, S. et Bowyer, J.L. 1994. Simulation modeling of particleboard density profile. Wood Fiber Sci. 26(3): 397-411.

Thoemen, H. 2000. Modeling the physical processes in natural fiber composites during Batch and Continuous pressing. Thèse de Doctorat. Oregon State University. 187 pp.

Thoemen, H. 2003. Simulation of the pressing process. Fundamentals of Composite Processing. Madison, Wisconsin. 5-6 November. 126 pp.

Tremblay, C. 1999. Détermination expérimentale des paramètres caractérisant les transferts de chaleur et de masse dans le bois lors du séchage. Thèse de Doctorat . Université Laval Québec Canada. 243 pp.

Turner, I. et Perré, P. 1995. A comparison of the drying simulation codes TRANSPORE and WOOD2D which are used for the modelling of two-dimensional wood drying processes. Drying Technology, 13(53): 695-735.

Turner, I. 1996. A two-dimensional orthotropic model for simulating wood drying processes. Appl. Math. Modelling 20: 60-81.

Vidal, M. et Cloutier, A. 2005. Evaluation of wood sorption models for high temperatures. Maderas: Ciencia y Tecnología. 7(3): 145-158.

Vidal, M., Cloutier, A. et Fortin, A. 2006. Modeling of heat and mass transfer during MDF hot-pressing: Part 1 Physical model. Soumis à la revue Wood Sci. Technol.

Von Haas, G., Steffen, A. et Frühwald, A. 1998. Permeability of fibre, particle and strand mats for gas. Holz als Roh und Werkstoff 56(6): 386-392.

Von Haas, G. 2000. Untersuchungen zur Wärmeleitfähigkeit von Faser und Spanmatten und Platten. Holzforshung und Holzverwertung. 52(5): 102-104.

Wang, S. et Winistorfer, P.M. 2000. Consolidation of flakeboard mats under theoretical laboratory pressing and simulated industrial pressing. Wood Fiber Sci. 32(4): 527-538.

Wang, S. et Winistorfer, P.M. 2000. Fundamentals of vertical density profile formation in wood composites. Part II. Methodology of vertical density formation under dynamic conditions. Wood Fiber Sci. 32(2): 220-238.

Ward, I.M. 1971. Mechanical properties of solid polymers. Wiley-Interscience. 375 pp.

Winistofer, P.M., Moschler, W., Wang, S., DePaula, E. et Bledsoe, B.L. 2000. Fundamentals of vertical density profile formation in wood composites. Part I. In-situ density measurements of the consolidation process. Wood Fiber Sci. 32(2): 209-219.

Wolcott, M.P. 1989. Modeling viscoelastic cellular materials for the pressing of wood composites. Faculty of the Virginia Polytechnic Institute. Department of Wood Science and Forest Products. Thèse de Doctorat. 182 pp.

Wolcott, M.P., Kamke, F.A. et Dillard, D.A. 1994. Fundamentals aspects of wood deformation pertaining to manufacture of wood-based composites. Wood Fiber Sci. 26(4): 496-511.

Wu, Q. et Milota, M.R. 1995. Rheological behavior of Douglas fir perpendicular to the grain at elevated temperatures. Wood Fiber Sci. 27(3): 285-295.

Zavala, D. et Humphrey, P. 1996. Hot pressing veneer-based products: the interaction of physical processes. Forest Prod. J. 46(1): 69-77.

Zombori, B. 2001. Modeling the transient effects during the hot-pressing of wood-based composites. Thèse de Doctorat. Virginia Polytechnic Institute and State University. Blacksburg, Virginia. 212 pp.

© Marcia Vidal Bastias, 2006